External fan-free power supply for many XPC Barebones
This technical accessory from the Shuttle XPC accessories range is able to
further reduce the operating noise of the Shuttle XPC. Ideal for environments
where whisper quiet operation is the order of the day. And the divided power
supply has decreased the temperature in the casing yet again. The XPC Accessory
PC62 delivers a maximum of 220 watt power and is therefore also suitable
for high-performance system configurations. It can be installed in only a
few steps and relevant installation instructions are included.
External AC/DC power adapter
Input voltage: 100~240V AC
Input current: 4A max.
Input frequency: 50~60Hz
Output voltage: 12V DC
Output current: 18A max.
Output wattage: 220W
Internal DC/DC power adapter (CP15)
no moving parts
Input voltage: 12.0~12.6V DC
Input current: 18A
| Voltage | Regulation | Min. Load |
Max. Load |
Ripple* | Ripple & Noise* |
| +5V | 5.1V +/- 5% | 0 A | 10 A | 50 mV | 100 mVpp |
| +12V | +/- 5% | 1.0 A | 16 A | 120 mV | 200 mVpp |
| -12V | +/- 10% | 0 A | 0.3 A | 120 mV | 200 mVpp |
| +3.3V | +/- 5% | 0 A | 10 A | 50 mV | 100 mVpp |
| +5VSB** | +/- 5% | 0 A | 2.0 A | 50 mV | 100 mVpp |
*) peak-to-peak max. **) SB = Standby
Total combined output wattage (3.3V, 5V, 12V) >=
200W
Total combined output wattage (3.3V, 5V): >=
70W
Hold up time: >16ms at full load
Power good signal: TTL compatible
ATX power 20 pin
ATX power 12V_A 4 pin
2x S-ATA
3x Molex for two hard disks and one optical drive
1x Floppy
Short circuit protection (SCP) - Latch off
Overpower (overload) protection (OPP)
Overcurrent protection (OCP)
Overtemperature protection (OTP)
Overvoltage protection (OVP)
Undervoltage protection (UVP)
Operating temperature: 10°C ~ 50°C
Storage temperature: -40°C ~ 70°C
MTBF rating: > 100.000 hrs at 75% load, 25°C ambient
This accessory is compatible with G, G2 und G5 chassis XPCs and the XPC model ST61G4, but not with SD11G5, SS58G2, SK83G, SN85G4, SN95G5 and ST20G5.